Tail Gas Treating Catalysts
Refineries and gas plants worldwide have reported lower operating costs, extended cycle lengths and reduced pressure drop as a result of installing Shell Catalysts & Technologies’ state of the art catalysts in their Claus tail gas treating units. We provide start-up and technical support for Tail Gas treating technology.
Meeting Sulphur Recovery Demands Without Increasing Energy Consumption
Having a well-operated Sulphur Recovery Unit (SRU) using Claus and Tail gas units (the later also knows as SCOT unit), are increasingly important as operators strive to meet their sulphur emissions mandates and lowering energy consumption. Although these processes can provide greater than 99.9% sulphur recovery, careful selection of the catalyst is necessary to ensure optimum performance and process economics.
Shell Catalysts & Technologies has expanded to provide a complementary portfolio of SRU catalyst solutions. Shell has augmented its portfolio in collaboration with Euro Support to offer Claus and Titania catalysts, presenting the best-combined value on the market. Our combined catalyst solution (Claus and Tail Gas catalyst) for the SRU cut costs, increase performance and extend cycle lengths. We pride ourselves on the unique extended customer service and collaboration to build solutions because we know that cost, performance and cycle length matters to you.
Shell Catalysts & Technologies’ C-234, C-534 and C-834 Tail Gas treating catalysts account for close to 70% of the world’s installed capacity. They are installed in over 270 reactors worldwide, including nearly all of the industry’s largest units.
|099||Catalytic Incineration||Used for the low-temperature oxidation of the sulphur compounds in Claus tail gas and tail gas processes selectively to SO2.|
|234||Claus Tail Gas||Low-temperature and low-density TRILOBE catalyst used for the reduction and hydrolysis of the sulphur compounds in Claus tail gases to H2S.|
|534||Claus Tail Gas||Higher density, very strong, lowest pressure drop spherical catalyst used for the reduction and hydrolysis of the sulphur compounds in Claus tail gases to H2S.|
|834||Claus Tail Gas||High activity lowest temperature catalyst with low-pressure drop, operated in TGU reactors at RIT less than 220°C (428°F).|
Shell Catalysts & Technologies offers a range of tail gas treating catalysts.
We work with customers to select the most appropriate candidate for each individual unit. We also help customers to optimise treatment processes in terms of the hardware involved and the conditions in the unit.
Residue Upgrading Catalysts
Dealing with the bottom of the barrel is high on the refining industry’s agenda. Effective use of catalysts is key.
Contact Shell Catalysts & Technologies
Contact Shell Catalysts & Technologies to meet the challenges petrochemical plants face with confidence.